Product code: 113
Mukavim topcoat water-based gloss enamel
Pure acrylic resin–based, dirt- and stain-resistant flexible gloss coating for interior, exterior and wood—water-based luxury topcoat at alkyd-like gloss without hazardous solvent thinners. Fast drying; high vapour permeability and glossy surface limit mould and bacteria. Low VOC; biocide-free full washability for playrooms; suited to kitchens and dining areas. Non-staining; washable and scrubbable.
Color options
Supported palettes
- Tekboya Color Palette View all colors
- RAL Palette
- NCS Palette
- - Alkyd-equivalent gloss
- - Solvent-free
- - Dirt- and stain-resistant
- - Flexible
- - Long-lasting colour retention
- - Odourless
- - Fast drying
- Pack sizes: 15 - 7,5 - 2,5 L Colour: Standard colour chart Chemical and physical properties:
- Density: 1,2 gr/ml -
- pH: 9
- Gloss: 75 ± 5 gloss (at 85°) 60 ± 5 gloss (at 60°) -
- Solids content: (%) % 50 -
- Solids by volume: (%) % 38 -
- Dry film weight: E2
- ETB (minimum particle size): (Smallest particle size) S1 -
- Water vapour permeability: V1 High - water vapour transmission rate W3 Low
- Wet scrub resistance: (High scrub resistance) Class-1
- OP (opacity) class: Class-2 (7-8 m²/L) -
- Safety warnings: S2 Keep out of reach of children. S24/25 Avoid skin and eye contact. S46 If swallowed seek medical advice immediately.
Previously painted walls: remove dust, dirt, blistered paint and friable chalked layers; fill and sand level defects; substrate dry and clean. Prime as required, then apply Tek Mukavim water-based gloss enamel. Wood: remove defective paint; fill and sand; prime, then apply Tek Mukavim. Sound timber: light sand; first coat up to 5% water, second coat neat; maintain even gloss.
Recoat ≥5–6 h; two coats recommended. Physical resistance ~1 week; chemical resistance 28 days. Avoid heavy brushing in hot wind on glossy substrates; sand lightly before recoating. Mix well; brush, roller or spray; clean tools with water before dry. Application +5–30 °C. Drying at 20 °C / 60% RH: touch-dry 1–3 h, through-dry 24 h, chemical cure 28 days. Coverage ~75 g/m² (35 ± 5 µm); ~10–16 m²/L first coat, ~8 m²/L second coat — verify by sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.