Product code: 109
Ceiling plastic emulsion
Water-based decorative matt interior coating with acrylic copolymer binder. Strong adhesion without cracking or mud-cracking; high opacity and whiteness as dedicated ceiling/interior paint and primer. For interior ceilings and walls on concrete, render, wood panel, fibre cement, plasterboard and similar substrates.
Color options
Fixed colors
- White
- Off-white
- - High hiding power
- - Superior whiteness
- - Non-yellowing
- - Easy application and flow
- - Matt flat appearance
- - Breathable
- Pack sizes: 20 - 10 - 3,5 Kg
- Colours: White
- Density: 1,69 ± 0,02
- pH: 8,5 ± 0,5
- Viscosity: 130 ± 5 ku Class:
- Gloss: G-3 Matt
- ETB (minimum particle size): (Smallest particle size) S-1
- Wet scrub resistance: (High scrub resistance) Class - 3
- Hiding power: Class - 1 (4 m²/L)
- Mould resistance: K-2 general purpose
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units when stacking ve am
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Mix thoroughly; brush or roller. Thin ~15–25% with water depending on substrate. Remove grease, dust and blistered coatings; prime weak areas with Tek Full Satin Gypsum, wait 1 day before topcoat.
Second coat after ≥2 h at ≥20 °C. Application +5–30 °C. Drying at 20 °C: touch-dry ~1 h, through-dry ~24 h. Coverage ~7–9 m²/L or ~4–6 m²/kg per coat (28 ± 5 µm dry).
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.