Product code: 107
Super plastic emulsion
Water-based decorative matt interior paint with styrene–acrylic binder. Washable with good colour retention, excellent adhesion and high opacity; matt look with vapour permeability and low water absorption—reduces blistering and chalking indoors. Long-life topcoat for plasterboard, render, brick, gypsum and similar walls with appropriate primer.
Color options
Supported palettes
- RAL Palette
- NCS Palette
Fixed colors
- Black
- Red
- Oxide Yellow
- - High hiding power
- - Breathable
- - Matt flat appearance
- - Decorative; good spreading
- - Vivid, lasting colours
- - Superior whiteness
- Pack sizes: 15 - 7,5 - 2,5 - 0,75 L
- Colours: Standard colour chart
- Density: 1,6 ± 0,03
- pH: 8 ± 0,5
- Viscosity: 120 ± 5 ku Class:
- Gloss: G-3 Matt
- ETB (minimum particle size): (Smallest particle size) S-1 Mould growth K-2 general purpose
- Wet scrub resistance: (High scrub resistance) Class - 1
- Hiding power: Class - 1 (5 m²/L)
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units when stacking ve am
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Mix to homogeneity. Thin brush ~15–20%, roller ~20–25% with water. Substrate must be dry and clean—do not paint damp surfaces. On plasterboard or weak/dirty walls after cleaning, use Tek Change primer.
Recoat ~3 h at 25 ± 3 °C; two coats recommended. Application +5–25 °C at 50–60% RH. Drying at 20 °C: touch-dry ~1 h, through-dry 24 h, wash/vapour resistance ~7 days. Coverage ~12–15 m²/L or ~7–9 m²/kg.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.