Product code: 106
Silicone silk matt plastic emulsion
Water-based decorative silk-matt interior paint with styrene–acrylic binder; silicone and hydrophobic modification yield washable colour retention, high opacity and silk-matt appearance. Silicone contributes high vapour permeability and low water uptake—breathable walls with reduced blistering, chalking and dirt pickup. Low VOC. Suitable on plasterboard, render, brick, gypsum and similar interior substrates with correct primer.
Color options
Supported palettes
- Tekboya Color Palette View all colors
- RAL Palette
- NCS Palette
- - Washable
- - Antibacterial performance
- - Moisture- and vapour-resistant
- - Superior whiteness
- - High hiding power
- - Decorative; good spreading
- - Silk-matt flat look
- - Breathable
- - Vivid, lasting colours
- Pack sizes: 15 - 7,5 - 2,5 L
- Colours: Standard colour chart.
- Density: 1,56 ± 0,05
- pH: 8,5 ± 0,5
- Viscosity: 110 ± 10 ku Class:
- Gloss: G-2 silk matt
- ETB (minimum particle size): (Smallest particle size) S-1
- Wet scrub resistance: (High scrub resistance) Class - 1
- Hiding power: Class - 1 (5 m²/L)
- Mould resistance: K-1
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) ortamda can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units halinde depolanmal
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Mix to homogeneity. Keep substrate and air +5–30 °C. Brush or roller; thin ~15–20% (brush) or ~20–25% (roller) with water as needed. Clean weak/dirty substrates; fill cracks; ensure dryness. Prime with Tek silicone interior blocking primer or Tek Change primer. Very weak, dusty plaster: Tek Full Satin Gypsum primer, wait 6–12 h, then silicone/blocking primer; paint after ~8 h.
At least two coats; ~3 h recoat at 23 ± 2 °C. Application +5–25 °C at 50–60% RH. Drying at 20 °C: touch-dry ~1 h, through-dry 24 h, wash/vapour resistance ~7 days. Coverage ~12–15 m²/L or ~7–9 m²/kg depending on substrate and film build.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.