Product code: 105
Satin silk matt
Water-based decorative silk-matt interior wall paint with styrene–acrylic copolymer binder. High durability and a distinctive satin-silk texture with true full washability. Non-yellowing, high opacity, flexible; high water-vapour permeability releases indoor moisture to limit cracking, blistering and sweating; smooth surface sheds dust. With suitable primer, protects plasterboard, render, brick, gypsum and similar interior substrates; decorative finish.
Color options
Supported palettes
- Tekboya Color Palette View all colors
- RAL Palette
- NCS Palette
- - Light aromatic orange scent
- - Fully washable
- - Moisture- and vapour-resistant
- - High hiding power
- - Decorative; good flow and leveling
- - Silk semi-gloss flat appearance
- - Breathable
- - Vivid, lasting colours
- Pack sizes: 15 - 7,5 - 2,5 L
- Colours: Standard colour chart
- Density: 1,33 ± 0,05
- Viscosity: 90-110 ku Class:
- Gloss: G - 2 semi-gloss
- Solids content: % 55 % ± 5
- VOC content: 25-35 gr/L (calculated theoretically)
- VOC content: Value 25-35 gr/L (calculated theoretically)
- ETB (minimum particle size): (Smallest particle size) S - 1
- Wet scrub resistance: (High scrub resistance) Class - 1
- Hiding power: Class - 1 (4 m² /L )
- Mould resistance: K - 1 general purpose
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) ortamda can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units halinde depolanmal
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Mix thoroughly before use. Brush or roller; thin first and second coats up to ~15% with water. Minimum 6 h between coats. Remove grease, dust, blistered paint as needed. Where sound, prime with Tek silicone-filled primer; on weak, dusty substrates such as plasterboard or satin plaster, saturate with Tek Full Satin Gypsum, wait 1 day, then Tek silicone-filled primer.
Apply Tek silicone satin silk matt no sooner than ~8 h after primer. At least two coats recommended. Application +5 °C to +30 °C. Drying at 20 °C: touch-dry ~30 min, dust-free ~1 h, through-dry 24 h, chemical resistance ~72 h. Coverage ~12–14 m²/L per coat (substrate-dependent); ~5–8 m²/kg.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.