Product code: 103
Endam decorative pearlescent effect paint
100% water-based acrylic resin pearlescent/patterned silk-gloss decorative coating. Interior living spaces show shifting colour and pattern with viewing angle. Odourless, high opacity, ready-to-use tools; stain-resistant; pearl lustre. No thinning; various applicators yield different nuances. High vapour permeability and decorative appearance.
Color options
Fixed colors
- Pearl
- Gold
- Silver
- - Odourless
- - Silk-gloss lustre
- - Breathable; decorative
- - Ready-to-use; water-based; resists dirt and stains
- - High hiding power
- - High vapour permeability; water- and alkali-resistant
- - Directional light reflection
- - Fully washable and scrubbable
- - Multiple applicator options
- - Wide range of pattern and colour effects
- Pack sizes: 12 - 2,5 - 0,75 L.
- Colours: Pearl, Gold
- Density: 1,1 ± 0,05 g/ml
- pH: 8,5 ± 0,5 Class:
- Gloss: 60 ± 5 parlak
- Water vapour permeability: V1 High water vapour transmission rate W-3 Low
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units when stacking ve am
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Remove wallpaper if present. Remove dust, dirt and blistered paint—especially friable chalking coatings. Level and sand defects; prime with interior primer; after ~1 day apply Tek Endam effect on a smooth substrate. Roll one shade lighter water-based matt paint with a satin roller; when dry, roll one coat Tek Endam pearlescent; while wet, pattern with sponge or effect tool.
Keep tool motion consistent for continuous pattern. Do not thin. Two-person application recommended: one rolls while the other textures before dry-down. Application +5–30 °C. Drying at 20 °C / 60% RH: touch-dry ~30 min, second coat ~4–6 h, through-dry 24 h. Coverage ~80–180 g/m² per coat depending on substrate and tool — verify with a sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.