Product code: 101
Acoustic water-based gloss interior wall paint
Rheological acrylic latex polymer–bound, dirt- and stain-resistant, flexible gloss coating developed for interior, exterior and wood surfaces: a water-based luxury topcoat with alkyd-like gloss. Water-based; contains no hazardous solvent thinners. Fast drying. High water-vapour permeability reduces condensation on interior surfaces; the slick glossy finish limits mould, algae and bacterial growth. Low VOC supports healthy indoor air, including children's rooms. Biocide-free, fully washable/scrubbable for playrooms. Ideal for cafeterias and kitchens. Non-staining; washable and scrubbable as required.
Color options
Supported palettes
- Tekboya Color Palette View all colors
- RAL Palette
- NCS Palette
- - Solvent-free; contains no biocide
- - Odourless
- - Flexible and fast drying
- - Low VOC
- - High hiding power
- - Alkyd-equivalent gloss level
- - Glossy, low-friction surface
- - Dirt- and stain-resistant
- - Does not yellow or embrittle with age
- - Maximum wash/scrub resistance; vapour permeability avoids condensation
- - Resistant to chemicals and weathering
- - Permanent, vivid colours
- Pack sizes: 15 - 7,5 - 2,5 L.
- Colours: Standard colour chart.
- Density: 1,2 gr/ml
- pH: 9 Class:
- Gloss: 75 ± 5 gloss (at 85°) 60 ± 5 gloss (at 60°)
- Solids content: (%) % 50
- Solids by volume: (%) % 38
- Dry film weight: E2
- ETB (minimum particle size): (Smallest particle size) S-1
- Water vapour permeability: V1 High water vapour transmission rate W-3 Low
- Wet scrub resistance: (High scrub resistance) Class-1
- OP (opacity) class: Class-2 (7-8 m²/L)
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units when stacking ve am
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Previously painted walls: remove dust, dirt, blistered old paint and friable chalking layers. Level irregularities with filler, sand smooth, remove dust; substrate must be dry and clean. Apply a suitable primer, then Tek Acoustic water-based gloss paint. Wood: remove loose/blistered paint; fill voids, sand. Prime appropriately, then apply Tek Acoustic water-based gloss. On sound timber, lightly sand to improve adhesion; for the first coat thin up to 5% with water; second coat undiluted. Maintain uniform gloss by even application.
Understand substrate behaviour and apply carefully. Recoat interval at least 5–6 h; two coats recommended. Full physical resistance in ~1 week; chemical resistance after 28 days. Avoid excessive brushing in hot, windy conditions to prevent lap marks. On glossy substrates, sand lightly before painting. Mix thoroughly before use; apply by brush, roller or spray. Clean tools with water before the paint dries. Application temperature +5 °C to +30 °C. Drying at 20 °C and 60% RH: touch-dry 1–3 h, through-dry 24 h, full chemical cure 28 days. Coverage: ~75 g/m² dry film (35 ± 5 µm); ~10–16 m²/L first coat, ~8 m²/L second coat — verify consumption with a control sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.