Product code: 207
Sun Shine water-based exterior varnish
100% acrylic water-based clear gloss varnish resisting seasonal weathering (freeze–thaw, heat, humidity); flexible water repellency for hard and soft substrates. Low VOC, high UV resistance for exterior decoration/protection of timber and coated masonry. Sunshine exterior varnish extends façade topcoat life with strong adhesion and water beading.
- - Water-based gloss
- - Stain- and dirt-resistant
- - Low VOC
- - High vapour permeability
- - Breathable
- - Flexible
- - Fast drying
- - Colourless
- - Clean, vivid exterior appearance
- - Protects underlying coating
- - Water- and weather-resistant
- - Ready to use
- - Low VOC environmental profile
- - Suitable for hard and soft substrates; UV protection
- - Application time savings
- - Resistant to heat, cold, precipitation and humidity
- Pack sizes: 15 - 2,5 L
- Colours: Colourless
- Density: 1,04 ± 0,05 gr/ml
- pH: 8,9
- Viscosity: 60 KU
- Gloss: Viscosity 60 KU
- Solids content: (%) 32 % ± 3 G-2 semi-gloss (depending on substrate: 15 - 40 gloss)
- VOC content: 28 gr/l (calculated theoretically)
- VOC content: Value 28 gr/l (calculated theoretically)
- Water vapour permeability: V1 High water vapour transmission rate W-3 Low
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units when stacking ve am
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Prepare as for repainting; repair level; prime if required. Apply Tek Sunshine exterior varnish ≥7 days after final façade coat to prolong life and appearance. Uniform suction across the substrate is critical for even gloss.
Ready to use; single coat brush or roller; second coat after ≥24 h. Hot tall façades: shade, ≤5% water if needed, two applicators recommended. Application +5–30 °C. Drying at 20 °C / 60% RH: touch-dry 1–3 h, through-dry 24 h. Coverage ~200–285 g/m² — verify by sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.