Product code: 205
Silicone textured exterior
Silicone-modified water-based styrene–acrylic textured matt exterior applied and patterned by roller. Flexible; hydrophobic/silicone chemistry for coastal/humid sites—high vapour permeability, low water uptake and elastic film reduce hairline cracking, blistering and chalking; early rain resistance and seasonal movement tolerance.
Color options
Supported palettes
- Tekboya Color Palette View all colors
- RAL Palette
- NCS Palette
- - UV-resistant pigments
- - High hiding power
- - Masks minor substrate defects
- - Hydrophobic and silicone enhanced
- - Custom roller textures
- - Breathable
- - Matt decorative appearance
- Pack sizes: 20 Kg
- Colours: Standard colour chart
- Density: 1,6 ± 0,05
- pH: 8,5 ± 0,5
- Gloss: G - 0 Dry film thickness E5
- Solids content: % % 65 ± 5 Class:
- ETB (minimum particle size): (Smallest particle size) S-3
- Water vapour permeability: V-2 Medium water vapour transmission rate W-3 Low crack bridging A-0 CO₂ permeability C-0 resistance to mould growth K-2 general purpose
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 1 year. Large packs must be stacked at most 5 high; carry packs by the handle. Store at room temperature indoors
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
New work: remove blistered coatings and dirt; ensure adequate key on slick substrates; repair render; prime with colour-matched exterior primer. Optional tie-coat: same-colour primer or same material thinned ~5–15% with water applied by lambswool roller. Finish with chosen coarse/fine roller: distribute evenly then draw in one direction only (top-down or left-right) across the whole elevation.
Inconsistent rolling causes pattern faults and colour mottling—complete each face wet-in-wet; shade hot façades; avoid stopping mid-wall. Dry substrates only. Application +5–30 °C; substrate >+5 °C. Drying at 20 °C: touch-dry 1–3 h, through-dry 24 h; chemical hardness ~72 h. Coverage ~450–1000 g/m² depending on texture — verify by sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.