Product code: 203
Silicone exterior
Styrene–acrylic water-based matt exterior paint with silicone and hydrophobic additives for marine/humid environments: high vapour permeability lets moisture escape without harming coating or render; low water absorption reduces blistering and chalking. Hydrophobic behaviour limits liquid uptake, improves early rain resistance and extends service life. UV-stable colours; excellent adhesion, flow and opacity.
Color options
Supported palettes
- Tekboya Color Palette View all colors
- RAL Palette
- NCS Palette
- - Fade-resistant durable colours
- - High hiding power
- - Long-life wax-modified formulation
- - Hydrophobic and silicone enhanced
- - Early rain resistance
- - Decorative; good spreading
- Pack sizes: 15 - 7,5 L
- Colours: Standard colour chart
- Density: 1,49 ± 0,05
- pH: 8,5 ± 0,5
- Viscosity: 125± 5 ku Class:
- Gloss: G-3 Matt Dry film thickness E2
- ETB (minimum particle size): (Smallest particle size) S-1
- Water vapour permeability: V1 High water vapour transmission rate W-3 Low crack bridging A-0 CO₂ permeability C-0 resistance to mould growth K-2 general purpose
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) ortamda can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units halinde depolanmal
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Mix well; roller or brush; thin ~25–30% with water as needed; ≥1 h between coats. Remove contamination; fill heavy cracking in render. Seal absorbent surfaces with Tek Izolan primer diluted 1:7, then Tek acrylic primer before topcoat.
If sound, proceed after Tek acrylic exterior primer. Application +5–30 °C; midday application advised when day/night ΔT is large. Minimum two coats. Drying at 20 °C: touch-dry 30–60 min, dust-free ~2 h, through-dry 24 h. Coverage ~12–16 m²/L or ~10–14 m²/kg (~28 ± 5 µm dry).
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.