Product code: 201
Blissful silicone vivid gloss exterior
Silicone and specialised APEO-free acrylic resin–based water-based exterior paint with silk-matt gloss appearance, long service life and low dirt pickup. Acrylic and silicone resins give strong water repellency; limits uptake of surface ice at −10 to −15 °C. High vapour permeability resists humidity and coastal salt spray at high temperature. UV-stable pigments retain colour. Product claims ~30% lower CO₂ footprint vs conventional benchmarks (manufacturer statement).
Color options
Supported palettes
- Tekboya Color Palette View all colors
- RAL Palette
- NCS Palette
- - Water-based durable vivid exterior finishes
- - Silk-matt gloss look; lower embodied carbon (claimed)
- - High water-vapour permeability
- - Strong water and alkali resistance
- - High UV resistance; low dirt retention
- - Flexible, tough film
- - Strong pseudoplastic (antisagging) profile
- - High wet-scrub resistance
- - Low VOC
- - Breathable
- Pack sizes: 15 - 7,5 L
- Colours: Standard colour chart
- Density: 1,2 ± 0,5 gr/ml
- Gloss: G2 silk matt 15–25 gloss dry film thickness E2
- Solids content: (%) 50 % ± 5
- VOC content: 35 gr/L (calculated theoretically)
- VOC content: Value 35 gr/L (calculated theoretically)
- ETB (minimum particle size): (Smallest particle size) S1
- Water vapour permeability: V1 High High water vapour transmission rate W-3 Low Low
- OP (opacity) class: Class-2 (7,5 m²/L)
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) ortamda can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units halinde depolanmal
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Remove dust, dirt and blistered coatings; repair and sand level; substrate dry and clean. Keep wall and ambient +5–30 °C. Prime with Tek Barrier exterior primer; after ≥1 day apply Tek Blissful exterior diluted ≤2–5% with water by brush or roller. Minimum 8 h between coats; two coats mandatory.
Application +5–30 °C. Drying at 20 °C / 60% RH: touch-dry 2–5 h, through-dry 24 h. Coverage ~7–8 m²/L two-coat system depending on absorbency — verify by sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.