Product code: 513
Transparent substrate primer
Styrene–acrylic water-based matt adhesion promoter for slippery interior surfaces—transition primer for tiling over existing ceramic without removal; increases bond on glassy substrates (do not plaster directly over this primer).
Color options
Fixed colors
- Pink
- - Water-based
- - For glassy and slippery substrates
- - Ceramic-over-ceramic systems
- - Specialty adhesion-promoting primer
- Pack sizes: 3,5 - 1 Kg
- Colours: Pink
- Density: 1,7 ± 0,05 gr/ml
- Gloss: Matt
- Solids content: % 70 % ± 2 gr/cm³
- Mould resistance: K-2 general purpose
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years.
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately Chemical properties:
Existing tiles sound and clean; verify structural capacity; dry wet areas thoroughly. Mix primer periodically; apply neat with brush or roller at +5–30 °C without drafts; never on frozen, saturated or permanently immersed surfaces. Reinforce corners and joints with mesh after two coats where specified.
Though single coat is sometimes quoted, highly absorbent backgrounds may need second coat after ≥24 h. Drying at 20 °C: ≥24 h on non-porous tiles. Coverage ~300–500 g/m² — verify by sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.