Product code: 509
Gypsum primer
Specialty modified polymer ready-to-use colourless interior gypsum primer binding loose plaster dust, limiting suction into topcoats while improving adhesion and spreading rate—use on highly absorbent satin plaster, gypsum board, lime plaster, brick and fair-faced concrete.
- - Water-based
- - Strengthens gypsum and weak substrates
- - Reduces plaster dusting and micro-cracking
- - Lowers topcoat consumption
- Pack sizes: 15 - 7,5 - 2,5 - 0,75 L
- Colours: Colourless
- Density: 1 ± 0,05 gr/cm³
- Mould resistance: K-2 general purpose
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years. Large packs stack at most 5 units; small pails stack at most 8 units when stacking. Carry
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Ensure clean dry surfaces; sand cured satin plaster, remove dust with damp cloth or brush, apply Tek satin gypsum primer by brush or roller.
Application +5–30 °C. Drying at 20 °C / 60% RH: touch ~1 h, through ~24 h. Coverage ~10–12 m²/L — verify by sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.