Product code: 508
Fibre-reinforced Su Kes primer
Silicone-modified pure acrylic ready-to-use elastic waterproofing with fibre reinforcement—fills coarse cracks, high alkali resistance, vapour-open semi-matt membrane for roofs, terraces, balconies, gutters, penetrations and movement-prone joints.
- - Water-based
- - Silicone enhanced
- - Environmentally considerate
- - Fibre reinforced
- - Ready to use
- - One-component
- - Breathable
- - Matt flat appearance
- - Elastic film
- - Solvent-free
- - Fills coarse voids
- - Resists cracking, splitting and peeling
- - Long-life waterproofing
- - Stable in cold and heat
- - High vapour permeability
- Pack sizes: 20 - 10 - 2,5 Kg
- Colours: White
- Density: 1,4 ± 0,05 gr/ml
- Gloss: G2 silk matt Dry film thickness: E2 Smallest particle: S1
- Solids content: 64% ± 5 gr/cm³
- VOC content: 25 gr/L (calculated theoretically)
- VOC content: Value 25 gr/L (calculated theoretically)
- Water vapour permeability: V1 High water vapour transmission rate W-3 Low
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years. Large packs: stack at most 5 units; small packs stack at most 8 units when stacking.
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Mix in-can to homogeneity. Remove contamination; wash and dry porous areas; repair ponding. At corners apply ~5 cm fibre-loaded stripe, prime entire surface with Tek Su Kes diluted 100% with water; after ~24 h apply two crossed coats of Fibre Su Kes neat by roller or brush.
Application +5–30 °C (+5–35 °C in dry weather). No application during rain/snow/frost; protect ≥24 h. Heat enclosed areas before/after work. Add protective layer if trafficked or potable. Drying at 20 °C / 60% RH: touch ~12 h, through ~24 h. Typical consumption ~0.75 kg/m² vertical, ~1.5 kg/m² horizontal — verify by sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.