Product code: 507
Su Kes waterproofing primer
Modified pure acrylic copolymer water-based opaque elastic primer/membrane for waterproofing concrete, render, brick, AAC, asbestos-cement sheets, roofs, balconies, terraces, reveals, pools, tanks and channels—breathable, low VOC, lightly chemical-resistant decorative isolation.
- - Water-based
- - Elastic
- - Excellent adhesion
- - Tight durable membrane
- - High opacity
- Pack sizes: 20 - 10 - 3,5, - 1 Kg
- Colours: White
- Density: 1,4 ± 0,05 gr/ml
- Gloss: Class silk matt water vapour transmission rate W-3 Low
- Solids content: % 65 % ± 5 gr/cm³
- VOC content: 25 gr/L (calculated theoretically)
- VOC content: Value 25 gr/L (calculated theoretically)
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years. Large packs: stack at most 5 units; small packs stack at most 5 units when stacking.
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
Apply only to dry, clean substrates; wash cementitious surfaces if needed; eliminate ponding. Clean oils, dust and friable matter. At horizontal/vertical junctions apply ~5 cm reinforced band with fibre-loaded Su Kes, then dilute first coat 100% with water where specified; second coat neat; alternate direction ≤24 h between coats. Dry enclosed works with heaters before/after application.
After 24 h apply two full coats by brush or roller. Application +5–35 °C in dry weather. If trafficked or potable-water contact is expected, add a protective wear layer. Drying at 20 °C / 60% RH: touch ~30 min, initial set ~12 h, through ~24 h; test cure ~24 h. Consumption ~200–500 g/m² depending on purpose — verify by sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.