Product code: 401
Water-based panel door paint
Factory-style flat-panel and architrave door topcoat: water-based acrylic, high opacity, vivid flexible colours, vapour-open low water uptake for clean surfaces and low VOC—fast drying semi-gloss finish.
Color options
Fixed colors
- Light Brown
- Dark Brown
- White
- Cream
- - Stain-resistant; water-based
- - Semi-gloss
- - High vapour permeability
- - Low water absorption
- - Washable
- - Low VOC
- Pack sizes: 2,5 – 0,75 L
- Colours: White, Cream, Dark brown, Light brown
- Density: 1,3 gr/cm³ ± 0,05
- Gloss: semi-gloss 80±2 parlak (85° ≥ 10 parlak) semi-gloss 36±2 parlak (60° < 60 parlak)
- VOC content: 35 g/L (calculated theoretically) resistance to mould growth K-2 general purpose
- VOC content: Value 35 g/L (calculated theoretically) resistance to mould growth K-2 general purpose
- ETB (minimum particle size): (Smallest particle size) S - 1 fine (S-1 ≥ 100 Mic)
- Water vapour permeability: V-1 High water vapour transmission rate W-3 Low
- Wet scrub resistance: (High scrub resistance) Class - 1
- Hiding power: Class - 1 (4 m²/L)
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C ambient) can be stored for at least 2 years. Store at room temperature indoors; protect from excessive heat and freezing.
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately Chemical properties:
Factory-primed American panel doors: wipe with damp cloth before painting. Repaints: sound, dry, dust-free; sand for adhesion. Fill defects; optional primer coat with door paint thinned ~10–15%. Apply two finish coats with 4–6 h between coats.
Brush or roller; two or three coats as needed. Ready to use; up to ~5% water by volume if required. Application +5–30 °C. Drying at 20 °C: touch ~5 min, dust-free ~30 min, hard ~24 h. Coverage ~10–15 m²/L per coat on timber depending on absorbency.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.