Product code: 102
Aqualife water-based wood preservative
Pure acrylic water-based silk-gloss decorative/protective wood coating for interior/exterior with high UV stability, adhesion and water repellency. Tolerates wet–dry and freeze–thaw cycling without blistering or peeling; preserves timber grain with vapour-open film and low odour/low VOC. Quick drying; compatible over existing solvent-borne wood stains.
Color options
Supported palettes
- Tekboya Color Palette View all colors
- - Water-based.
- - Silk lustre finish
- - Ready to use.
- - Alkyd-compatible
- - Non-flammable.
- - Environmentally considerate
- - Flexible. UV protection
- - Fast drying.
- - Breathable
- - Low VOC.
- - Saves time
- - Easy application.
- - Weather-resistant when cured
- - May be applied over solvent-borne coatings
- - High water-vapour permeability and
- - Odourless
- - Strong water and alkali resistance
- - Early rain resistance
- - Stable in heat, cold and humidity
- - Vivid lasting colours for interior and exterior use
- Pack sizes: 15 – 2,5 - 0,75 L
- Colours: Standard colour chart
- Density: 1,03 ± 0,05 gr/ml
- Viscosity: 1 dk. 10 sun (DIN CUP-4) Class:
- Gloss: G-2 semi-gloss ( depending on substrate: 15 – 35 parlak )
- Solids content: (%) 25% ± 3
- VOC content: 28 gr/L (calculated theoretically)
- Water vapour permeability: V1 High High water vapour transmission rate W-3 Low
- Transport and storage: In original packaging with the lid fully closed, protected from sunlight and frost (+5 to 35 °C) can be stored for at least 2 years. Large packs: stack at most 5 units, small packs: stack at most 8 units when stacking ve am
- Safety warnings: S2 Keep out of reach of children S24 Avoid skin contact S25 Avoid eye contact S46 If swallowed seek medical advice immediately. Chemical properties:
- Chemical properties: Density 1,03 ± 0,05 gr/ml Solids content (%) 25% ± 3 Viscosity 1 dk.
Strip failed coatings; sand stained areas; dust-free. New timber: sand defects and knots, remove dust, ensure dryness—minimum two coats recommended.
Brush or roller. Application +5–30 °C. Drying at 20 °C / 50% RH: touch-dry 30–60 min, through-dry ~24 h. Coverage ~10–14 m²/L two-coat depending on species — verify by sample.
No questions have been added for this product yet.
Need Help Choosing a Product?
Contact us to find the best product for your surface type and application needs.